Tell us about the property and the problem. We’ll follow up to schedule a site visit.
Commercial Property Services
ADA Access, Ramps & Bollards
Accessible routes, ramps, handrails, curb ramps, accessible parking, and protective bollards — surveyed, built, and documented.
Exterior accessibility construction on commercial property across twelve Midwest states. Concrete, asphalt, steel, and striping under one scope since 1996.
What applies to existing property
The ADA is not a building code
Building codes commonly grandfather existing construction. The ADA does not. It is civil rights law, and a grandfather provision in a local code does not exempt a business from its obligations under it.
What existing facilities owe is barrier removal where doing so is readily achievable — easily accomplishable without much difficulty or expense, judged against the resources actually available.
That standard is deliberately relative. What is readily achievable for a large portfolio is not the same as what is readily achievable for a single small building, and the analysis weighs the nature and cost of the work against the financial resources of the business and any parent organization.
The regulations also set a priority order for barrier removal, which is the part most property owners have never been told. First, access from public sidewalks, parking, and public transportation. Second, access to the areas where goods and services are offered. Third, restroom access. Fourth, other amenities.
Accessible parking and the route from it to the entrance sit at the top of that list. If resources are limited, that is where the regulations themselves say to begin — which is a useful thing to be able to document.
One more mechanism worth understanding. Elements built to the 1991 standards generally hold a safe harbor and need not be brought up to the 2010 standards, but that protection ends the moment the element is altered. And when an alteration affects a primary function area, the path of travel to it must also be made accessible unless the cost exceeds 20% of the overall alteration cost.
That last rule is why exterior accessibility belongs in the planning conversation for any remodel, not the punch list.
Capabilities
ADA access work we perform
Concrete, asphalt, steel, and striping — the four trades exterior accessibility work actually requires, held under one scope.
Call 309-796-2222- Concrete access ramp construction
- Ramp replacement and slope correction
- Landings and turning areas
- Curb ramp construction and repair
- Accessible route width correction
- Level-change and joint correction
- Sidewalk and walkway replacement
- Detectable warning surface installation
- Ramp and stair handrail fabrication
- Handrail height and extension correction
- Gripping surface replacement
- Edge protection and curbs
- Guard rail and barrier installation
- Steel repair, welding, and refinishing
- Loose and failed anchor repair
- Exterior stair reconstruction
- Accessible space and aisle layout
- Space count and van-accessible correction
- Slope correction and regrading
- Striping and pavement marking
- Signage and post installation
- Sign height correction
- Route from parking to entrance
- Wheel stops and curb work
- Concrete-filled pipe bollards
- Removable and sleeved bollards
- Decorative bollard covers
- Storefront and entrance protection
- Utility, meter, and equipment guarding
- Drive-through and dock protection
- Damaged bollard replacement
- Layout that preserves route clearance
Reference
Accessible parking requirements
Counts are calculated per parking facility rather than across the whole property, so a site with several separate lots is figured lot by lot.
| Total spaces in lot | Accessible spaces required | Of those, van accessible |
|---|---|---|
| 1 to 25 | 1 | 1 |
| 26 to 50 | 2 | 1 |
| 51 to 75 | 3 | 1 |
| 76 to 100 | 4 | 1 |
| 101 to 150 | 5 | 1 |
| 151 to 200 | 6 | 1 |
| 201 to 300 | 7 | 2 |
| 301 to 400 | 8 | 2 |
| 401 to 500 | 9 | 2 |
| 501 to 1,000 | 2% of the total | 1 of every 6 |
| 1,001 and over | 20, plus 1 per additional 100 | 1 of every 6 |
At least one van-accessible space is required in every case. Beyond the counts, the dimensional requirements are where most lots actually fall short:
Reference
Ramp and handrail requirements
The figures below are the 2010 ADA Standards for ramps. They are worth having in hand before pricing a ramp, because a ramp built to the wrong slope is a full rebuild rather than a correction.
Existing sites with genuinely limited space have narrow allowances in Table 405.2 for steeper slopes over very short rises — 1:10 for a rise of 6 inches or less, 1:8 for a rise of 3 inches or less. These are exceptions for constrained retrofits, not design targets, and we will tell you plainly when a site qualifies and when it does not.
Survey findings
Where commercial property most often falls short
These are the conditions we record most frequently. Most of them are measured in inches, which is why a lot can look accessible and still have several deviations.
The single most common finding. A lot that was within 1:48 when built drifts past it after an overlay, because the new surface follows the old grade and adds thickness unevenly. Nothing about the lot looks different, and the stall is now out of compliance.
The aisle has to sit at the same level as the space it serves and run its full length. Aisles that fall away toward a drain, or that stop short of the stall, are both frequent and easy to measure from the street.
The bottom edge of the sign must be at least 60 inches above the ground. Signs set at eye level, or lowered at some point and never reset, are among the more common and least expensive deficiencies to correct.
Handrails outside the 34-to-38-inch range, or without the required 12-inch extensions beyond the top and bottom of the run. Older ramps frequently have rails that stop exactly at the slope, which is a finding.
Settled sidewalk panels, heaved joints, and tree-root lifts. Anything over a half inch requires a ramp, so a single displaced panel can take a compliant route out of compliance.
Bollards, wheel stops, sign posts, and planters placed on an accessible route and reducing its clear width below 36 inches. A safety improvement installed without checking clearance becomes a compliance problem.
A curb ramp built into the aisle is a specific prohibition and a common one, usually because the aisle was the only flat area available when the ramp was added later.
At least one van-accessible space is required regardless of lot size. Small lots with a single accessible stall and no van designation or widened aisle are a routine finding.
The route from the accessible space to the entrance has to be continuous, 36 inches wide, and free of curbs and stairs. Striped paths that cross a drive lane, or that end at an unramped curb, do not satisfy it.
Bollards and protection
Bollards are not an ADA requirement
They are protective infrastructure — they stop vehicles from reaching storefronts, entrances, utilities, equipment, and people. Nothing in the standards requires them. Where they intersect with the ADA is clearance, and that is where they are most often installed incorrectly.
A bollard on an accessible route cannot reduce it below 36 inches. We lay out protection against the route first, then place the bollards, rather than the other way round.
Concrete-filled pipe bollards at glass, entrances, and vestibules. The cost of a bollard against the cost of a storefront replacement is not a close comparison.
Gas meters, electrical gear, backflow assemblies, condensers, and dumpster enclosures. These are the strikes that turn a parking incident into an outage.
Where access has to be maintained for deliveries, fire lanes, or seasonal use, sleeved and removable bollards keep the protection without blocking the opening.
Where an accessible route passes in front of a parking space, wheel stops keep vehicle overhang from narrowing it. A small detail, and a frequent finding.
A struck bollard that is leaning or has broken its footing is no longer protecting anything. Replacement includes the concrete, not just the pipe.
Our work
Concrete, steps, and handrail work
Accessible routes and stair work on commercial property we maintain.
Call 309-796-2222
Process
How we survey, scope, and document
Single corrections, phased programs, and work driven by a consultant’s or attorney’s report all start the same way.
Call 309-796-2222Measured survey
Parking counts, space and aisle dimensions, slopes, route widths, level changes, ramp slopes, handrail heights, and sign heights — recorded as actual dimensions rather than a visual assessment.
Findings in priority order
Grouped using the regulatory priority order — parking and the route from it, then access to goods and services, then the rest — so the sequence reflects the regulations rather than our convenience.
Phased, itemized scope
Priced by item so work can be approved in phases and budgeted across cycles. Where restriping would resolve something, we say so rather than quoting concrete.
Built and documented
The work performed, with post-work dimensions recorded. That record is yours to keep — for ownership, for a tenant, for an insurer, or for counsel.
About our ADA work
What we bring to accessibility work
Concrete, asphalt, steel fabrication, and striping. Exterior accessibility work crosses all four, and splitting it across contractors is where scopes develop gaps.
Recorded dimensions against the standards. A survey that says a ramp is 1:9.5 is useful; one that says it looks steep is not.
We build and document. Legal exposure and what is readily achievable for your organization belong to your counsel or consultant, and we will say so rather than guess.
Many of these jobs arrive as a consultant’s or attorney’s findings list. We price and execute against that document and report back against the same line items.
Itemized scopes that can be approved in stages, which is how most of this work actually gets funded on a commercial property.
One account and a consistent standard across every location, in twelve Midwest states. Operating this way since 1996.
Common questions
ADA access questions
Answers below reference the 2010 ADA Standards. They are provided as general information, not as legal advice.
Call 309-796-2222Does the ADA apply to a building that was built before 1990?
Yes. This is the most common misunderstanding we encounter.
Building codes frequently grandfather existing construction. The ADA does not work that way — it is civil rights law rather than a building code, and a grandfather provision in a local code does not exempt a business from its ADA obligations.
What existing facilities owe is barrier removal where doing so is readily achievable, meaning easily accomplishable without much difficulty or expense. That is a sliding standard rather than a fixed one: what is readily achievable for a large portfolio differs from what is readily achievable for a single small building, and the analysis weighs the nature and cost of the work against the financial resources available.
Which barriers should be addressed first?
The regulations set out a priority order, and it is worth knowing because it explains why exterior work comes first:
First, access from public sidewalks, parking, and public transportation. Second, access to the areas where goods and services are offered. Third, restroom access. Fourth, other amenities.
Accessible parking and the route from it to the entrance sit at the top of that list. That is most of the work we do on this service, and it is the work that matters most if resources are limited.
How many accessible parking spaces does our lot need?
It scales with the total count in that lot, and each parking facility is calculated separately rather than across the whole property.
One space for 1–25 total, two for 26–50, three for 51–75, four for 76–100, five for 101–150, six for 151–200, seven for 201–300, eight for 301–400, nine for 401–500, then 2% of the total from 501 to 1,000, and 20 plus one per additional 100 above 1,000.
At least one of every six accessible spaces — or fraction of six — must be van accessible, and there must always be at least one van-accessible space.
What are the dimensions for an accessible parking space?
A car space is 96 inches wide minimum with a 60-inch minimum access aisle. A van space is either 132 inches wide with a 60-inch aisle, or 96 inches wide with a 96-inch aisle.
The access aisle must be at the same level as the space it serves and the same length, and two car spaces may share a single aisle — though not where spaces are angled. Van spaces, the access aisle, and the vehicle route to and from them need 98 inches of vertical clearance, which is what catches covered parking and structures.
Both the space and the aisle must be no steeper than 1:48 — roughly 2% — in any direction. That one figure is responsible for more findings than any other on this list, because slope drifts out of tolerance quietly when a lot is resurfaced.
What are the ramp requirements?
Running slope no steeper than 1:12 and cross slope no steeper than 1:48 (§405.2). Maximum rise of 30 inches for any single run before a landing is required (§405.6). Minimum clear width of 36 inches between handrails.
Landings at the top and bottom of every run, at least 60 inches long in the direction of travel (§405.7.2) and at least as wide as the widest run leading to them (§405.7.3). Where the ramp changes direction, the landing must be at least 60 by 60 inches (§405.7.4).
Handrails on both sides of any run with a rise greater than 6 inches (§405.8), mounted 34 to 38 inches above the walking surface measured to the top of the gripping surface (§505.4), with extensions of at least 12 inches beyond the top and bottom of the run (§505.10).
Edge protection on each side of runs and landings (§405.9) — either a surface extending at least 12 inches beyond the inside face of the handrail, or a curb or barrier that prevents a 4-inch sphere from passing.
Existing sites with limited space have narrow allowances in Table 405.2 for steeper slopes over very short rises, but those are exceptions for constrained retrofits, not design targets.
When does a change in level require a ramp?
Up to 1/4 inch, a vertical change is permitted as-is. Between 1/4 and 1/2 inch, it must be beveled at no steeper than 1:2 (§303.3). Anything over 1/2 inch has to be ramped and meet the ramp or curb ramp requirements (§303.4).
This is why sidewalk joints, settled panels, and heaved concrete become accessibility issues and not just maintenance ones. A half-inch lip at a panel joint on an accessible route is a barrier under the standards, and it is also the most common thing we find on a survey.
Are bollards an ADA requirement?
No. Bollards are protective infrastructure — they exist to stop vehicles from striking buildings, storefronts, utilities, and people. There is no ADA requirement to install them.
Where they intersect with the ADA is clearance. A bollard, wheel stop, sign post, or planter placed on an accessible route cannot reduce its clear width below the 36-inch minimum. We see well-intentioned protection installed in a way that narrows the route below standard, which converts a safety improvement into a compliance problem.
The related detail: where an accessible route runs in front of a parking space, wheel stops are needed so a parked vehicle's overhang does not reduce the route below 36 inches.
Can we just repaint the stripes and signs?
Sometimes, and it is worth checking first because it is the inexpensive answer.
Striping and signage are genuinely common deficiencies — faded markings, a missing van-accessible designation, or a sign mounted with its bottom edge below the 60-inch minimum above the ground. Those are straightforward corrections.
What paint cannot fix is slope, clear width, level changes, or a route that crosses a traffic lane or a curb. If the space or aisle exceeds 1:48, no amount of restriping brings it into compliance — that is concrete or asphalt work. We check both so you know which category you are in before you spend.
Who determines whether we are compliant?
Not us, and this is worth being direct about. There is no permit inspection or certificate that establishes ADA compliance the way a building inspection closes out a code item. Enforcement comes through complaints and private litigation, which means the determination is made after the fact.
Our role is the physical work and the measurements: we survey, document what we find with actual dimensions, do the construction, and give you a record of it. Whether a given condition creates legal exposure, and what is readily achievable for your organization, is a question for your counsel or an accessibility consultant.
We will happily work from a report an accessibility consultant or your attorney has already produced, and a good number of our ADA jobs start that way.
What happens to the older standards when we alter something?
Elements built to comply with the 1991 standards generally hold a safe harbor and are not required to be brought up to the 2010 standards — until that element is altered. Once you alter it, the safe harbor no longer covers it and the current standards apply.
There is a further consequence worth planning around. When an alteration affects a primary function area, the path of travel to that area must also be made accessible, unless the cost of doing so is disproportionate — defined as exceeding 20% of the overall alteration cost.
Practically, that means a remodel can pull parking, exterior routes, and entrances into scope. It is much cheaper to know that during planning than to discover it mid-project, and it is a reason to have the exterior surveyed before a build-out is priced. See tenant build-outs and remodels.
Why does exterior work get cited so often?
Because it is measurable from outside the building. Parking slope, space and aisle widths, sign heights, curb ramps, handrails, and entrance clearances can all be checked with a tape measure and a level without entering the property or buying anything.
Compliance on these items is measured in inches, which means a lot that reads as obviously accessible can still have several measurable deviations. It is also why a survey with real recorded dimensions is more useful than a visual walkthrough.
Can you do the work in phases so we can budget it?
Yes, and for most properties that is the sensible approach. We separate findings into what we would address first, what can reasonably follow, and what is a longer-term capital item, with the regulatory priority order as the organizing logic rather than our own preference.
That gives you something you can take to ownership or a board: a documented scope, phased, with the reasoning attached. Showing a deliberate, documented plan is a materially different position than having no record at all.
Related services
Commonly scoped alongside access work
Concrete, striping, and door hardware are usually part of the same accessibility scope.
All ServicesRequest a bid on ADA access work
Tell us the property and what you need looked at — parking, a ramp, routes, or a consultant’s findings list. We’ll follow up to schedule a survey.
309-796-2222- We walk the site and assess the actual condition.
- You get a priced scope before any work starts.
- Emergency? Call the number above instead of filling this out.
Send the details and we’ll be in touch to schedule a site visit.